Maximum fuel quality through efficient drying and waste heat recovery
The A TEC Flash Dryer was specifically developed for the processing of moist alternative fuels. By utilizing existing process waste heat, the moisture content of the fuel is significantly reduced while simultaneously improving fuel quality.
In addition to drying, unwanted components are selectively removed, which increases the calorific value and expands the range of applications for alternative fuels.
Your benefits at a glance:
Utilization of Existing Process Waste Heat
- Utilization of Waste Heat from the Clinker Production Process
- No additional fossil fuels required
- Improving the Plant's Overall Energy Efficiency
- Sustainable Use of Existing Energy Resources
Cost-effective and energy-efficient
- Reducing Fuel Moisture
- Lower operating costs
- Quick Payback
Optimized Fuel Quality
- Drying of substitute fuels with high moisture content
- Homogenization of the fuel
- Improving Fuel Consistency
- Expanding the Applications of Alternative Fuels
Improved combustion properties
By reducing the water content, a larger proportion of the energy contained in the material is immediately available for the combustion process.
Advantages in the Furnace Process
- Higher calorific value of alternative fuels
- More stable combustion conditions
- Increased substitution rates for alternative fuels
Integrated Removal of Impurities
During the drying process, the material is simultaneously screened, separating heavy materials and 3d materials from the fuel.
Higher Performance Through Lower Fuel Moisture
Reducing the water content not only improves the fuel's calorific value but also reduces the thermal load on the furnace system.
The A TEC Flash Dryer transforms moist, partially usable alternative fuels into a high-quality energy source, while making optimal use of the process energy already available at the cement plant.
Interest
We're happy to help
